|
|
The effective coverage of the heat demand using solar system
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
This master thesis aims to design the heating system and HDW preparation in an apartment building. The first variant deals with condensation gas boiler as the only energy source, while the second variant combines the gas boilers with the solar thermal system. The apartment building is located in Prag and has three above-ground floors and a basement. In the basement is the technical room. Convectors are being used for heat distribution. The theoretical part deals with the introduction to the solar thermal system.
|
|
|
Residential Building - Lesná
Michna, Adam ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Matějka, Libor (advisor)
Bachelors thesis „Residential building Brno – Lesná“ is processed in form of project documentation. This thesis investigates the apartment building with four apartments and an underground garage with stacking parking system. The plot is situated near housing estate Lesná, close with Diviš district, which is made up of small family houses. On the plot are situated five dimensionally similar houses, this work deals with one of them in detail. This is a building with two underground floors, two floors above and a residential attic. The underground part in which there is a parking space, use of reinforced concrete structure, above-ground part is made up of a brick wall system. The house is covered with wooden gable roof truss purlin system. The house has two two-room apartments and two maisonettes three-room apartments.
|
|
|
Apartment Building Gemini
Povýšil, Marek ; Pilinszki, Martin (referee) ; Brzoň, Roman (advisor)
The subject of the bachelor’s thesis is elaboration of the project documentation of an apartment building in Brno – Medlánky. The building is designed as free-standing in a sloping terrain and has 4 floors above and 1 underground. There are a total of 18 dwelling units. The structure in underground floor is designed as combination of reinforced conrete walls and columns, the structure of floors above is designed as masonry sytem of walls from brick blocks. The ceiling structures are designed as reinforced concrete slabs. The roof structure is in a form of warm flat green roof. The foundation structures are designed as reinforced concrete strips and pads.
|
|
|
Heating of flat house
Burýšková, Jana ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The goal of this bachelor thesis is the design of heating systém for apartment house in Brno. The heating system is two-pipe closed with forced circulation. Areas of the heating surfaces are panel radiators and tubular. The heat source for the solved object are two gas condensing boilers in the technical room. Mixed hot water heating will be solved in an indirect heating heater. In the theoretical part the thesis deals with the types of heating systems and radiators.
|
|
|
Apartment building
Kirová, Šárka ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
This bachelor's thesis deals with project documentation for the construction of an apartment house in Přelouč. The proposed building has four floors, no basement with 15 residential units, technical facilities and 14 individual garages. Vertical load-bearing and non-load-bearing structures are designed from Porotherm ceramic blocks. The perimeter masonry is contact insulated with facade expanded polystyrene and plastered with a thin layer of gray and white plaster. The fillings of the openings are plastic windows, including plastic entrance doors with a side skylight. Horizontal structures form monolithic reinforced concrete slabs reinforced unidirectionally or in both directions. The roof of the building consists of a flat roof with a vegetation layer. The apartment building is based on simple concrete foundation strips. The building is designed regarding the existing surrounding housing development. Part of the bachelor's thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
|
| |
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Small apartment house
Doseděl, Adam ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
This thesis describes the design of small apartment building in Prostějov. It is a detached building with basement. The apartment building has one basement and four above. Consists of a total of 15 residential units. On first floor are situated three flats and on second, third and fourth floor are four residential units. The building is designed of structural systém of ceramic blocks. The ceilings are from monolithic and the roof is designed as a pitched roof. The work includes project documentation for the construction.
|
|
|
Apartment building
Karafiát, Filip ; Ladomirjáková, Jitka (referee) ; Sobotka, Jindřich (advisor)
The subject matter of this bachelor thesis is a project documentation for an apartment building’s construction in locality of Sadova, Mensikova street in Brno. The building has a basement with 13 parking spaces, a cellar and an utility room. There are four floors with 13 residential units above the basement. Part of the roof of a garage is made as a vegetation and second part is made as a terrace for flats. Main roof of the building is designed as a flat roof with a classic order of layers. The object is designed as monolithical. Garage is solved using columns and gutters, te residential part is solved with monolithic walls. Monolithic reinforced concrete slabs serve as a ceiling. The facade of the building is solved in the ETICS system, in some places, a ventilated facade with PREFA cladding is used.
|
|
|
Apartment building
Hančík, Dominik ; Navrátil, Michal (referee) ; Kacálek, Petr (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building in the town of Kunovice near Uherské Hradiště. It is a free-standing building, which is sunk into the terrain, which results from several character buildings. The building has a basement over its entire area and this part has the entire basement space, followed by 3 individuals above ground floor. The change of the floor is designed so that there are two residential units on its area, the size is then filled from the exact location on each floor, but it is possible to live in six families. All these housing units are designed in connection with the concept of an intense green roof. You can look structurally in the buildings from the point of view of a classic brick building, but the basement masonry and the internal dividing structures of this floor are designed as reinforced concrete monolithic vertical structures. The other perimeter masonry is made of precise cut ceramic faces. The character of the dividing inner load-bearing walls, inter-apartment walls is conceived from the point of view of the acoustic resistance of these parts, for this reason these constructions are solved with the help of precise acoustic shapes. The ceiling structure of the apartment building in all floors is designed as a reinforced concrete slab. The roof structure of the apartment building is designed as a flat intensive green roof with a slope of 3 %. Drainage of this structure is with the help of roof heated drains, located in the places of residential cores. The entire perimeter of the roof structure is lined with an attic, which is followed by a dominant railing. The facade of the building will be made with a double character, where the plinth part is made of facade structural paint with the character of concrete screeds, the other parts of the building will then be provided with silicone facade plaster with the given structure.
|
guest ::
